GENSTAR® Precision Conveyor Bearings
4003 Bearing - 1.9" Tube 16 Gauge
4003 Bearing
1.90"
x 16 Gauge
| •
Load capacity 300 # per
bearing • 6002-2RS Precision ABEC 1 Sealed Core Bearing • Quiet running operation • IronGrip Carbon steel housing • Insert molded static discharging bushing |
 |
|
Load & Life 1.9" x 16 gauge crimped conveyor rollers endure testing at 780 surface feet per minute carrying a continuous load of 600 lbs. Precision Core Bearing Load rating of the 6002-2RS precision core bearing is 1260 lbs. Double seals contain the lubrication and seal out contaminants. Noise Levels Frantz 1.9" x 16 gauge precision bearing runs at approximately 56 decibels. In comparison a GEN II series runs at 71 decibels and a conventional 1.9 Series stamped metal bearing runs at 84 decibels. The insert molded bushing proves to reduce noise level within the precision bearing assembly. IronGrip Carbon Steel Housing Carbon steel housing swaged tight delivers a very secure crimp fit in a roller assembly without sacrificing bearing clearances. Insert Molded Polypropylene Bushing The feature of insert molding static discharging polypropylene material within the ABEC 1 bearing assembly proves to be robust in both static and dynamic loads. Results reflect the insert molded one piece bushing outperforms traditional latching style bushings both in load and life expectancy. Axle lug/bushing interference issues are reduced compared to typical latching style inserts as well. Excellent concentricity is achieved through the molding process resulting in higher quality and longer life. Lubrication 6002-2RS precision core bearings are offered standard with a lithium based grease that exhibits good rust and corrosion resistant properties. The grease has excellent low temperature properties including low starting and running torque at very low temperatures. Additional characteristics are good mechanical stability, a high degree of resistance to water and extremely high oxidation stability. Temperature range of the grease is -58° to 240° Fahrenheit. Recommended ambient operating temperature range of the bearing is -58° to 240° Fahrenheit. Assembly The Frantz bearing assembly is intended to be crimped into metal tubing. A precise fit-up between the bearing assembly and roller will aid in increasing bearing life. Frantz Manufacturing has the expertise to supply 1.9" Precision Bearing crimp tooling as well. |
|
 |
 |