- Load capacity 1000 # per bearing
- 6005-2RS Precision ABEC 1 Sealed Core Bearing
- Quiet running operation
- IronGrip Carbon steel housing with retention slots
- Insert molded static discharging bushing/sleeve
- Performs in high impact environments
- Interchanges with your current bearing
Load & Life
2-1/2” x 11 gauge crimped conveyor rollers endure testing at 820 surface feet per minute carrying a continuous load of 2000 lbs.
Precision Core Bearing
Load rating of the 6005-2RS precision core bearing is 2260 lbs. Double seals contain the lubrication and seal out contaminants.
FRANTZ 2-1/2” x 11 gauge precision bearing runs at approximately 50 Decibels. In comparison a conventional 2500 Series stamped metal bearing runs at 88 Decibels. The insert molded polypropylene components prove to reduce noise level within the precision bearing assembly.
IronGrip Carbon Steel Housing
Carbon steel housing swaged tight delivers a very secure fit in a roller assembly without sacrificing bearing clearances.
Insert Molded Polypropylene Bushing
The feature of insert molding static discharging polypropylene material within the ABEC 1 bearing assembly proves to be robust in both static and dynamic loads. Results reflect the insert molded one piece polypropylene bushing outperforms traditional latching style bushings both in load and life expectancy. Axle lug/bushing interference issues are reduced compared to typical latching style inserts as well. The isolator sleeve allows for tubing variation and absorbs crimping pressures alleviating tight bearings compared to a precision bearing pressed directly into a metal adapter. The polypropylene sleeve is molded within the metal adapter slots to aid in retention. Excellent concentricity is achieved through the molding process resulting in higher quality and longer life. Actual field tests have proven the bearing to perform in high impact environments.
6005-2RS precision core bearings are offered standard with lithium and calcium based grease that exhibits good rust and corrosion resistant properties. Excellent noise reducing ability and mechanical stability are additional characteristics. Temperature range of the grease is -4 to 240 degrees Fahrenheit. Recommended ambient operating temperature range of the bearing is -4 to 240 degrees Fahrenheit.
The FRANTZ bearing assembly is intended to be crimped into metal tubing. A precise fit-up between the bearing assembly and roller will aid in increasing bearing life. FRANTZ Manufacturing has the expertise to supply 2-1/2” Precision Bearing crimp tooling as well.
An important value added factor when considering the FRANTZ 2-1/2” x 11 Gauge Precision Bearing is the interchange advantage with other FRANTZ commercial grade non-precision bearings. (2510, 2512, 2530, 2532, 2540, & 2542) The molded insert is identical length thru the bore and maintains the same extension, thus eliminating costly tool changes for relocating stakes on the axles, reducing the need for different tube lengths and limits additional set-up time. Whether the need for a 2-1/2” x 11 gage commercial grade non-precision bearing or an ABEC 1 bearing style, a smooth transition from one to the other is accomplished when selecting the FRANTZ product.